Posted by Cédric Lardière |June 22, 2022 |MEASUREMENT, TECHNOThe improvements focus on the user interface, with a larger screen, deeper memory, additional optional functions, etc.“Improving the overall usability so that test engineers can focus on ongoing design issues, not the operation of the test equipment itself, was paramount when we decided to update the RTP series,” says Andreas Werner, Vice President Oscilloscopes at Rohde & Schwarz.The German group has therefore just launched the new generation of its RTP digital oscilloscopes on the market, which is in fact “the combination of the exponential performance of the RTP series with an improved user interface and a larger screen”.The RTP B models benefit from a 13.3-inch Full HD color touchscreen TFT screen, instead of 12.1-inch WXGA and brighter, and a completely redesigned front panel, allowing you to quickly change settings and d Increase productivity with quick and direct access to settings.Dimensions (W × H × D) and mass remain unchanged (463 × 285 × 349 mm and 18 kg).Other characteristics include the presence of four analog channels, a bandwidth of 4, 6 or 8 GHz, which can be extended to 13 GHz (RTP134B) or 16 GHz (RTP164B) on only two channels, a sampling frequency 20 GS/s (double on two channels), a minimum noise floor of 270 µV (RTP044B; sensitivity of 2 mV/div), a high definition mode up to 16 bits (10 kHz to 200 MHz), a acquisition rate of 750,000 waveforms/s thanks to an acquisition and processing Asic, etc.Another improvement brought to the RTP B relates to the memory depth which now reaches 100 Mpoints per channel as standard and up to 3 Gpoints per channel (B130 option).“These oscilloscopes offer the exceptional performance and flexibility that our customers expect, combined with a very small footprint.They have been ideal for real-time signal integrity analysis since their initial launch.And they got even better,” continues Andreas Werner.Additionally, the new K136 and K137 options support advanced eye diagram analysis of sequential bits in an acquired data stream with maximum data rates of 8 and 16 Gbps respectively.Bit-slicing synchronization is based on continuously operating hardware clock recovery (HW-CDR).It is even possible to combine this function with those of differential mathematics and real-time deembedding to perform debugging or find signal faults in a fraction of the time.In addition to a wide range of applications (mask test, 16 logic channels [B1], arbitrary waveform generator [B6], serial triggers and decodes, jitter analysis [K12], compliance tests), Rohde & Schwarz now offers the user-defined math option (RTP-K39), application options K27 (MIPI D-PHY v2.1/2.5), K28 (MIPI C-PHY v2.1) and K102 compliance testing (USB 3.2 Gen 1 & 2 RX).To find all our news on industrial measurement, click on this link.Designed by Elegant Themes |Powered by WordPressReceive our newsletter by email